In the architectural decoration project, the use of aluminum profiles to make doors and windows is more common. Although the size and style of aluminum alloy swing doors are different, the construction methods and manufacturing methods of aluminum alloy swing doors are similar. Today, I will introduce the installation method of the aluminum alloy swing door. If you have recently been guilty of installing the aluminum alloy swing door, then take a look!

The main constituent materials of aluminum alloy swing doors

1. Door frame part: used for frame edge profiles around the door frame and other profiles of the door frame.

2, swing door hardware: door handles, fastenings and so on.

3, door frame and wall connector: aluminum angle profile about 2 mm thick, also requires a specific size of the screw.

4. Swing glass: It is best to use double-glazed glass with a thickness of 3 mm.

Introduction of aluminum alloy swing door installation method

When we have prepared the above materials, we can start to install the door. First, we will use the elastic line to find the rules, then handle the door opening, and then find the connecting iron in the hole. At this point, we will open the purchased aluminum alloy swing door and carry out unpacking inspection, and place it in the required place according to the drawing number. After that, we will check whether the protective film of the aluminum alloy is puncture, and then install the aluminum alloy door. At this time, the insulation around the door is filled with some insulation materials and cleaned up. After that, we installed the hardware on the aluminum alloy swing door, and then installed the door seal. If there is any other need, we can also install the glass. Here, Xiaobian will tell you in detail about the installation position of the wall thickness. The best installation position is based on the size on the drawing and the width of the platen. If there is a deviation, in principle, it should be exposed on the window sill. The dimensions are the same.

Anti-corrosion treatment of aluminum alloy swing doors

If the aluminum alloy swing door is installed with iron parts for fixing, it is necessary to carry out anti-corrosion treatment, and the connecting piece is preferably made of stainless steel. Secondly, the anti-corrosion treatment on both sides of the aluminum alloy swing door frame should be treated according to the design requirements. If there is no design requirement, it is necessary to apply anti-corrosion materials, rubber-type materials, etc. can be used.

Having said that, I believe that everyone has already learned about the installation of aluminum alloy swing doors. Don't forget that after installing the door, be sure to check whether the hardware is connected and solid with the aluminum alloy swing door. Finally, if time permits If you do, you must do the work of fixing the wall.

Infrared heating is the perfect way to warm a space without the dusty dryness of traditional convection heating. Actually, it offers many advantages to the user: easy to install, fixed direct to the wall or ceiling, reduce your heating costs, CO2 Free, no maintenance and if you are renting, the Panel Heater can be moved easily unlike conventional heaters that are bulky and require professional help. This low-cost heating solution is suitable for wet rooms and bathrooms because the panels is double insulated with an IP rating of 65. The infrared panel reduces condensation and mould in area prone to dampness, which promotes the overall air quality and helps prevent allergies.

Ceiling Mounted Carbon Crystal Heater

Ceiling Mounted Carbon Crystal Heater,Electric Carbon Fiber Heater,Carbon Crystal Wall Heater,Far Infrared Carbon Crystal Heater

Shandong Dexiang Electrical Technology Co.,Ltd , https://www.infraredroomheater.com