Wall decoration is the focus of home decoration. When using paint to change the color in your home, you should do the following preparations before coating construction:

1. Calculate the painting area.

The painting area measured in the home decoration is only the theoretical area, and a certain surplus is required at the time of purchase. It should also be noted that some characteristics of the coating will also cause the final coating area to deviate from your theoretical area. First of all, the units used by different paints are used in kilograms, some in litres, some in gallons, and some in barrels. It is best not to buy them in barrels. The quality and quantity inside will be different, which is prone to errors. .

2. Good ventilation.

Take necessary protective measures before applying the paint, such as wearing tight overalls, gloves, masks and safety glasses to prevent direct contact with the skin and harmful gases directly into the respiratory system. If you accidentally get your skin stained, wipe it off as soon as possible and wash it off with soap or water.

3, paint construction is best to choose in the dry season, which is conducive to achieve the desired coating effect, and is not prone to lacquer disease.

4. In order to obtain the ideal wall decoration effect, whether it is a new wall or an old wall renovation, it is best to apply a primer first.

5. After the paint is finished, the tools and residual materials should be cleaned in time, and the paint bucket should be closed. The solvent drum should be covered and stored in a cool and ventilated place. For oily coatings, avoid direct sunlight and avoid washing hands with toxic solvents such as solvents with high benzene.

[Follow the WeChat public number "Jiuzheng Paint Network"; pay attention to surprises, scan code to view "If your husband is selling paint..." Jiuzheng Coating Network Exchange Group]

CPVC Diaphragm Valve is made by CPVC body with PTFE diaphragm. As CPVC resin have good propert of corrossion resist and temperature resist, so the CPVC Diaphragm Valve is usually used in chemical industrial for acidic and alkaline medium delivery, CPVC diaphragm valve is designed by pressure rate PN1.0Mpa, flange end according to standard DIN, JIS, ANSI. Size from 1/2" to 10", working temperature from 0 degree to 95 degree. Manual type and pneumatic actuator operate for optional.

Ningbo RMI Plastic Co.Ltd offer CPVC diaphragm valve with specification:

Size range:DN15~DN250 (1/2 inch ~ 10 inch)
Body materials:CPVC
Diaphragm material:PTFE,EPDM,FPM,NBR,NR
Connection: Flange ANSI CL150, JIS10K, DIN PN10
Design pressure:0.25~1.0Mpa (PN2~10 bar)

CPVC Diaphragm Valve

CPVC Diaphragm Valve,Diaphragm Valve CPVC,Diaphragm Valve Plastic,CPVC Valve

Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com