The so-called electric screwdriver is the electric screwdriver. It is based on the ordinary screwdriver and is driven by electric power, which greatly improves the working effect. However, if the electric screwdriver does not pay attention to its use and maintenance skills during the use, its service life It won't be too long, so today I teach you how to use and maintain electric screwdrivers.

Methods and techniques for using and maintaining electric screwdrivers:

1. Please read the driver's instruction manual before use and use it according to its specifications.

2, the ordinary motor set lock frequency is 4s / 1 screw, 900 screws per hour lock, 7500 screws can be locked daily. The Swiss motor sets the lock frequency to 2.5s/1 screw, and locks 1440 screws per hour. It can lock 12000 screws per day. Therefore, be sure to pay attention to the motor size of the electric screwdriver during use. Do not operate blindly. In order to prevent damage to the electric screwdriver beyond the workload.

3, the use of this model 45-75 range of torque is more appropriate, can not overload 80 torque to long-term use.

4. When using, it is not allowed to directly adjust from the lowest twist to the highest twist or from the highest twist to the lowest twist, which easily causes the clutch steel ball and the torque ejector to fall off.

5. Tighten the fixing ring (or torque sheath) of the screwdriver before use. The two ends of the power cable should be symmetrical with the power supply and the socket of the electric screwdriver, and tighten the nut of the power cable.

6. Do not touch grease or other turbid liquids inside the screwdriver.

7. For the effectiveness of maintenance, please protect the serial number and warranty card of the screwdriver.

Although the electric screwdriver is the same as the ordinary screwdriver, it is relatively easy to operate. However, if the operation method is not correct or the use technique is not in place, it will cause some damage to the electric screwdriver. Therefore, I suggest that you do not use the electric screwdriver. In the case, it is best to find a professional staff to carry out the construction!

Concerned about surprises

Label: Simple introduction to the use and maintenance of electric screwdriver

Previous: Wooden doors choose to see wood paint and hardware Next: "Three major standards" to help you choose the sink

Steering Racks Bearing

The wheel Hub Bearing , also called hub assembly, wheel hub unit or hub and bearing assembly, the wheel hub assembly is a crucial part of your steering system contributing to the safe steering and handling of your vehicles.
Wheel bearing is applied to automobile axle to load and provide accurate guide components for the rotation of the wheel hub, both bearing axial load and radial load. It has good performance to installing , omitted clearance, light weight, compact structure, large load capacity, for the sealed bearing prior to loading, ellipsis external wheel grease seal and from maintenance etc. And wheel bearing has been widely used in cars, in trucks also has a tendency to gradually expand the application.


OUR MAIN PRODUCTS
We manage in all kinds of ball bearings and roller bearings,such as
1.Deep Groove Ball Bearing
2.Self-aligning Ball Bearing
3.Cylindrical Roller Bearing
4.Spherical Contact Bearing
5.Angular Contact Bearing
6.Tapered Roller Bearing
7.Auto Engine Valve
8.Auto Parts Piston And Ring

If you have any request for Clutch Bearing,please chat with us in your free time!!
Packing:
1.Industrial tube packing + cartons + pallets
2.Individual colorful or white box + carton + pallets
3.As the clients' requirement
Shipping
1.Less than 45 KGS, we will send by express. (Door to Door, Convenient)
2.Between 45 - 200 KGS, we will send by air transport. (Fastest and safest, but expensive )
3.More than 200 KGS, we will send by sea. (Cheapest and usual)

Dac5378 Automobile Hub Bearing,Qj210Lb Bearing,Cw509024 Bearing,Baq-3954Ab Bearing

Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearing.com