Easy to master the three major areas of the bathroom purchase

The family bathroom usually consists of a toilet and a bathroom (most families are combined), and its composition can be roughly divided into three parts: sanitary ware area, bathing area and face-washing beauty area. There is a close connection between each region, and at the same time there is a functional difference.

The preferred choice for taking the toilet is to determine the drainage method of the bathroom: whether it is the lower row or the rear row. If it is the lower row, you must measure the distance from the sewage outlet to the wall, and choose the size according to this size. Otherwise, the best toilet will not be used. Followed by drainage performance, the performance of the toilet is washed, water-saving, and quiet. Now people have misunderstandings about the "cleaning" two, thinking that the dirt can be discharged from the toilet. In fact, flushing has two meanings. One is to rush out of the toilet. The second is to rush out the sewage pipe, and both can be completely cleaned. Mute water saving is a hot trend, so these products are greatly favored by users. This type of toilet purchase should start mainly from the drainage method, pipe position, internal structure and the lack of toilet accessories. At present, the drainage method of the toilet is mainly siphoning and flushing. The siphon is to use the water level difference between the sewage pipe and the water seal to generate suction and sewage; the flushing is to use the impact of the water flow to achieve a sewage discharge. There are also contradictions here. The flushing type of water saving is superior to the siphon type, but the volume is large; the joint sitting mute effect is stronger than the split, and is used for a large amount. Finding the best combination of the two is the key to your choice.

At present, there are two kinds of basins on the market: basins and column basins. There is no difference in function between them, but there are differences in form. The basin is suitable for opening a large bathroom, which is very sturdy; the pedestal is suitable for a compact bathroom, which looks delicate and chic. The choice of bathtub is inclined to acrylic cylinders, because acrylic profiles are light in weight, low in thermal conductivity, easy to clean, good in feel, and more in line with human body design, but the price is higher than steel cylinders.

The glaze is not only the face of the sanitary ware but also the inner quality. The good glaze is smooth and uniform, the acid and alkali resistance is strong, the water absorption rate is low, the dirt is not hanged, and it is easy to clean. It is the "favorite" point of the housewife. It is the choice to rely on your skill and unique vision. The choice of sanitary ware style and color is based on personal preference. The white sanitary ware is clean and clear; the black and white bathroom looks youthful; the colorful bathroom highlights the personality and style. The simplicity, elegance, simplicity, and avant-garde style are the complete manifestation of the new concept of life. Life and personalization are no longer patents for living rooms and bedrooms.

The choice of hardware for sanitary ware is “heavy and light”. The good faucets are made of ceramic core valves, which are tightly integrated with the outer casing. They are durable and durable. The choice of these faucets can only be based on the feel of the hand. Be cautious to buy, remember to ask for a certificate of inspection and a warranty when you buy.

In general, to achieve the above points, the choice of bathroom ware is basically qualified, of course, the harmony of sanitary ware and brick and floor tiles can not be ignored, such a bathroom will make you comfortable.

Flap Disc

Flap disc, commonly known as flat emery cloth wheels, emery discs, flower impellers or elastic grinding discs, are a large variety of coated abrasive conversion products, which press the cut coated abrasive sheets one by one. It is formed by sticking adhesive to the back cover plate along the circumference. The flap disc are called strong elastic grinding discs. They are made of calcined emery cloth, which uses mesh, nylon, plastic, steel paper and other materials as the base. Attached abrasive tools, evenly distributed in a fan shape to ensure the best grinding effect. The particle size is 36#-320#, 60# and 80# are the most common, and the outer diameter is 4"-7" installed on the angle grinder. Angle grinders are mainly installed on hand-held Power Tools to polish and polish welds, burrs, chamfers, surface rust removal, and surface polishing of various metal and non-metal parts.

Flap Disc115

The flat emery cloth wheel (flap wheel) is formed by sticking multiple emery cloth sheets on the tray in a fan-shaped superimposed arrangement, and the bonding angle between each emery cloth and the tray plane is 10°-30°. The emery cloth arrangement of the utility model can make When the abrasive cloth wheel grinds and polishes the workpiece to be processed, the cutting angle is optimized to ensure that the base material of the abrasive cloth wheel and the grinding are consumed simultaneously, which obviously improves the overall wear resistance and grinding efficiency of the flat abrasive cloth wheel, and prolongs the service life of the abrasive cloth wheel. Grind the surface of metallic and non-metallic materials.

Flap Disc412

product advantages:

Compared with the resin grinding wheel for fixed abrasives, it has the advantages of polishing and polishing at one time, shortening the operation time, saving the grinding cost, high efficiency, good heat dissipation, high grinding efficiency, reducing operator fatigue, increasing machine life, etc. It has strong elasticity, High tensile and bending strength and good grinding effect. The grinding speed is fast, the effect is good, and the noise during grinding is low. It is suitable for various industries or fields of manufacturing such as major metal parts factories and machinery factories. Good weather resistance, salt spray resistance and heat resistance, suitable for use in different regions.

Scope of application:

It is suitable for polishing of stainless steel, metal, metallurgy, automobile, wood, marble and other industries. It is especially suitable for the processing of stainless steel and can replace the resin-shaped grinding wheel. It has strong elasticity, high tensile and bending strength, good self-sharpening, high grinding rate, and low noise. It is suitable for welding seams in the box. Polishing of the edges.

There are different classifications of louvers according to different angles. The following are two common classifications:

According to the appearance: T27 VS T29

Flap disc generally have two shapes, curved and flat.

The flap disc type is also called the T27 type, and the curved type generally refers to the T29 type.

The flap disc type (T27) has a flat surface. It is mainly used to polish the flat surface and the external edges and corners. The flap disc and the workpiece are angled during work, which can complete the grinding and polishing at one time, reducing the work flow.

The curved surface of the curved louver (T29) has an upward arc, which makes the T29 flap disc have a better cutting ability on the plane. When working, the T29 type grinding wheel forms an angle of 15° to 25° with the grinding surface, which is mainly used to deal with the grinding of contours and edges. When there are higher requirements for speed and cutting ability, T29 flap disc is undoubtedly the best choice.


The related abrasive products we can supply is Flap Disc Adhesive, bonded abrasives, and Abrasive Machine such as Flap Disc Making Machine,Abrasive Belt Making Machine, Flap Wheel Machine , Polishing Machine ,Sanding Disc Machine, if you have any needs about abrasive tools, please kindly feel free to contact us.

Flap Disc324

According to the type of abrasive particles: ceramic alumina VS zirconium corundum VS alumina

According to the type of abrasive selected, the flap disc can be divided into three types: ceramic alumina, zirconium corundum and alumina.

Because ceramic alumina itself has many crystals, it has good self-sharpening, relatively neat edges, good heat dissipation, and long service life. Therefore, ceramic alumina louvers are mainly used for the grinding of stainless steel, aluminum and other hard metals.

Zirconium corundum itself is a polycrystalline crystal, with fast cutting speed, good self-sharpening, and strong resistance to high pressure and high temperature. Therefore, zirconium corundum louver blades have strong cutting ability and long service life.

Alumina: single crystal, the cutting ability begins to decline at the beginning of grinding, and the abrasive grains are not easy to break, so the alumina flap disc is suitable for the processing of common metals.


Flap Disc,Flap Disc Machine,flap disk 4.5,Polishing Flap Disc,Sandpaper Flap Wheel

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com