In addition, the hardware accessories should be checked for completeness. General hardware fittings should be equipped with: set of fixing bolts and fixed copper plates and gaskets; full face basin lifting water remover; two inlet pipes. Remove the faucet from top to bottom and left and right to move the handle. It feels light and easy to open and close with a slight and even block. Then check the plating surface, which is bright, free of air bubbles and scratches. If the faucet is used in a new house, there will be impurities such as sand grains in the water pipe that is newly laid. The water should be discharged for a long time before installation until the water quality is clear.

Install one end of the two inlet pipes on the faucet, and the other end is connected to two hot and cold angle valves or two hot and cold joints. The basin is installed in water, connected to the bottom of the basin to remove water, and the end is connected to the "S" or "P" shaped elbow. Do not use force to make damage when opening the machine. After use, the surface of the faucet should be wiped clean. After using for a period of time, cut off the hot and cold water flow. Use a wrench to carefully unscrew the faucet filter to clean the impurities and then carefully install them. The general leading manufacturers implement three-year quality assurance for users, and promise to freely repair product quality problems within three years, and enjoy life-long service after three years.

Concerned about surprises

Tag: installation hot and cold wash basin inlet pipe to water

Previous: Instructions for installing solenoid valves Next: Maintenance and maintenance methods for locks

Professional manufacturer of Wood Screw in China, wholesale Cutting Tool, Screw Key, Spring Drill with low price, high quality.

Hardwares

Wood Screw,Cutting Tool,Screw Key,Spring Drill

Hebei Charlotte Enterprise Co., Ltd. , http://www.cnscreening.com