1/4" (6mm) Air Die Grinder (Hn-Dg6001)

Model NO.: HN-DG6001
Condition: New
Customized: Customized
Color: Silver
Free Speed: 25000r.p.m
Air Consumption: 4cfm 115L/Min
Working Pressure: 90psi
Air Inler: 1/4"
Air Hose: 3/8"
Trademark: HUNEER
Transport Package: Carton Box
Specification: 1/4" Chuck
Origin: China
HS Code: 84671100
Name: 1/4" Air Die Grinder

Item No.: HN-DG6001


Rear eahaust or rear 360°

Durable and lightweight die cast aluminium body;

Convenient one hand operation with safety trigger for easy and safety start;

Good choice for smoothing sharp edges, deburring, polishing and grinding;

Better than electric power tools, widely used in all kinds of metal precision process, such as die castings, sheet metal parts, metal welding parts, machinery parts, all kinds of mold and special-shaped workpiece processing,grinding level surface, grinding chamfering, removal burr, grinding, polishing and carving,etc;

Item No.  Collet Size Free Speed Air consumption Air Inlet Air Hose N.W. packing
HN-DG6001  6MM  3MM 25000r.p.m      4cfm   1/4"   3/8" 0.5kgs 25pcs/ctn

Image Details:


Air Supply & Pressure
• Always use a clean and dry air supply to operate the tool at 90psi.
• To ensure operating safety, performance and prevent damage to the tool do not operate exceed the maximum working air pressure.
Air Line
• Use a fitting air hose for connection between the compressor & tools.
• Ensure that the compressed air is cooled and its water content filtered and lubricated as required as shown in Fig 1 below.
• Excessive moisture levels can be compressed in the pipe and can permeate into tools & equipment resulting in mechanical failures and possible
Air Hose
• Ensure all hoses and fittings are clean and free of dust and debris before connecting any tools and equipment.
• Dust and debris can cause rust and malfunction in the tools and can result in dangerous operation.


1.Q: Can you send us samples
A: We are pleased to send you the sample to test the quality and market.

2.Q: About your products, could you do it OEM?
 A: Yes, OEM is workable for us, but with MOQ.

3.Q: Have you guarantee for your products?
 A: Normally we provide half year guarantee with spare parts supply.

4.Q: Do you also provide spare parts of pneumatic tools? 
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some vulnerable parts.

5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized but with MOQ.

6.Q: Can you inform us about the inner box?
A: We have 2 choices for inner box: ?neutral box(white-box & neutral color box) and customized color box with MOQ.

7.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.

8.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.

9.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.

10.Q: How does your factory do regarding quality control?
A: HUNEER People always pay great attention to quality control from the very beginning, and every product was tested piece by piece before delivery.