Home central air conditioning is known as the "three-point product seven-point installation," saying that a set of home central air conditioning can be normal operation, design, installation, construction and other aspects of the importance of no less than the air-conditioning host equipment. Here's a look at the installation points for home central air conditioning.

Indoor unit installation location : Poor installation of the indoor unit will not only affect the actual use results, but will also cause a lot of physical discomfort. The location of the central air-conditioning indoor unit needs to be coordinated with the layout of the interior decoration, usually hidden on the ceiling or hidden above the high counter.

Installation position of outdoor unit : Central air conditioning main unit should be installed in a good ventilation and heat dissipation, easy maintenance, hidden location, in order to avoid noise affecting indoor places, you can choose to install outside the balcony or window.

Central air-conditioning is a concealed project. It is installed at the stage where the decoration starts to do water and electricity. It means that after the renovation starts, it needs to be arranged for entry. Therefore, the installation of home central air-conditioning must be coordinated with the home decoration. As the installation of central air-conditioning in the home first, after the home renovation, the installation of home central air-conditioning must determine the renovation program to reserve space in advance. On the basis of ensuring the air conditioning effect, the installation position of the air conditioning indoor unit and the direction of the air duct are determined.

Air conditioning central air-conditioning purchase

Activated Carbon is a very small carbon particle with a large surface area, and there are even smaller holes in the carbon particle-capillary. This capillary has a strong adsorption capacity, because of the large surface area of the carbon particles, it can be in full contact with gas(impurities). When these gases(impurities) touch the capillary, they are adsorbed and act as purifiers. The study of the surface area of activated carbon is very important. The detection data of the specific surface area of activated carbon is only true and reliable by using the BET method. At present, there are many instruments in China that can only be detected by direct comparison methods. Now it is also in China. It was eliminated. At present, multi-point BET method is used for specific surface area testing at home and abroad. The specific surface area measurement standards formulated at home and abroad are based on BET test methods. See the Chinese National Standard(GB/T 19587-2004)-BET principle for the determination of the surface area of solid substances. The specific surface area detection is actually a more time-consuming task. Due to the different adsorption capabilities of samples, the testing of some samples may take a whole day. If the test process is not fully automated, the testers can not leave at all times. And to be highly focused, observe the dashboard, control the knob, and inadvertently lead to the failure of the test process, which will waste a lot of valuable time for the tester. The F-Sorb 2400 ratio surface area tester is an instrument that can truly achieve the BET method detection function(with a direct comparison method). The more important F-Sorb 2400 ratio surface area tester is the only fully automated and intelligent surface area detection device in China so far., Its test results are highly consistent with international standards and have good stability. At the same time, it reduces human error and improves the accuracy of test results.

Other Activated Carbon

Adsorption Activated Carbon,Dry Activated Carbon Desiccant,Graphite Particles Carbon Agent,Capacit Granular Activated Carbon

NINGXIA SINOTOPSKY INTERNATIONAL TRADING CO.,LTD. , https://www.nxsinotopsky.com