There are so many bathroom brands on the market that many consumers feel confused when they choose, because they do not know which brand to buy. The name of the Eagle bathroom is estimated to have been heard, but other aspects of its quality should not be very clear. Next, let's find out how Xia Ying sanitary ware belongs to a few brands . By the way, know the installation method of the sanitary ware.

1, Eagle bathroom belongs to several brands

Eagle bathroom belongs to several brands ? It is understood that Eagle bathroom is a domestic brand, second only to the United States Kohler, Japan's TOTO, the product's cost is also very high, very fine workmanship. In addition, the sanitary ware produced by Eagle Sanitary Ware has a great sense of texture, uniform plating, and a thick sense of sight; it also has a high-strength anti-corrosion, anti-abrasion function, and the surface color is bright as a mirror.

2, Eagle bathroom installation method

(a) Take out the pipe plug of the ground water outlet, check whether there is no debris in the pipe, and then clean the area around the nozzle. Then, align the outlet pipe of the toilet with the outlet of the water pipe, and level it to make sure that it is at the hole of the toilet bolt. Draw a stamp and remove the toilet. Align the back center of the toilet with a vertical line. Draw a horizontal line at a height of 800 mm above the ground. Draw an imprint on the horizontal line according to the position of the two holes on the back of the tank. Play a diameter of 30 mm and a depth of 70 mm at the hole. Hole.

(b) Insert a bolt 10 mm in diameter and 100 mm long into the hole and secure it with cement. Hang the back water tank on the bolts, align and align them, especially align with the center of the toilet bowl. Put a good rubber pad on the bolts, screw on the nuts, and tighten them to a moderate degree.

(c) At the imprint, drill a hole 20 mm in diameter and 60 mm deep. Insert a 10 mm diameter bolt into the hole and cement it firmly. Align the toilet eye with the bolt so that it matches the mark. After the test, The toilet was removed. Put putty around the outlet of the toilet bowl and the nozzle of the water pipe, and then align the four bolt holes of the toilet with the bolt, lay it flat and align it. Put a rubber pad on the bolt and screw it on until the nut is tight.

(d) When installing the backwater tank water elbow, first remove the nuts of the backwater tank water outlet and the toilet water inlet, and put it back to back on the water elbow. The rubber pad is also placed on the sewage pipe. Insert the upper end of the water elbow into the drain of the back tank, insert the lower end into the water inlet of the toilet, push the pad to the nozzle, screw on the nut, straighten the water elbow and straighten it, and tighten it with the pliers. Moderate. When using the eight-character door to connect the water, the size of the water tank's drift gate should be measured first, and the short section should be prepared. The eight-character door should be installed and the upper water inlet pipe should be installed.

(e) Break the copper pipe or plastic pipe, and then put the dripping door and the eight-word door nut back to back on the copper pipe or plastic pipe. The pipe is tied with oil asbestos rope or lead yam twine and inserted into the drift door and the eight-word door respectively. In the inlet and outlet, tighten the nut.

Xiao Bian concludes: Through the knowledge of the above content, everyone is now aware of the Eagle bathroom belonging to several brands and bathroom installation methods. To sum up, the quality of the Hawk bathroom is still very reliable, good bathroom can bring better enjoyment to our life, so picking a good bathroom is still very important.

Tool carts are favorable due to lower price and large storage space. Big power tools can be stored on shelves.

Service Tool Cart

Drawer Tool Cart,Service Tool Cart,Utility Tool Cart,Drawer Utility Cart

Changzhou Xingsheng Tianhe Electric Appliance Co., Ltd , https://www.roller-tool-cabinet.com