In fact, it will not be difficult to install toilets. If you master its steps, and you install the toilets yourself, you will be more comfortable, so that you can know which materials to use, and at the same time, you can also reduce the cost of a small amount of money. The following Xiao Bian will introduce to you the details of toilet installation steps and the size of the toilet from the wall is appropriate.

Toilet installation steps explained

1, toilet installation steps in detail First of all you have to use a hacksaw or cornea mouth level according to the height of 0.5 cm can be, this time someone may ask why reserve 0.5 cm, because the toilet flange is soft if If the height is not more than 0.5 cm, water seepage may occur. If you set aside 0.5 cm, it will be more closely attached.

2, the flange ring with the toilet distribution installed in the drain, but this side to remind is to press hard to ensure the flange and the toilet's water level of the paste.

3, move the toilet to the installation port, install the flanged toilet and press it down to the outlet, in order to see the tight effect, you can arrange a person can go sit for 5-10 minutes, this can guarantee the flange and the drain Perfect fit.

4, after the end of pressing it must be glued to deal with it, here to tell you a little secret, I believe that many people have encountered is the home of the toilet with a long time, the plastic will be there will be moldy situation, here To suggest a solution for everyone, it is recommended that you can buy structural adhesives. If you use glass adhesive, you will avoid this situation.

5, along the toilet under the strict gap began to glue, to hit the glue must be played evenly when some, if the first time the installation of uneven playing can use the fingertips on the cling film to repair the rubber mouth, this is also Can guarantee the overall appearance.

6. Finally, connect the water valve and wait 24 hours for the glue to dry before it can be used normally.

How much is the size of the toilet from the wall

At present, the more common sizes on the market are 300, 350, 380, 400 mm. The distance from the toilet pit is also based on the distance from the wall on the back of the toilet to the center of the toilet downpipe. And you must consider the thickness of the tiling when measuring, the manufacturer's toilet shows 400mm pit distance, then you only need to leave the 380mm pit distance when you measure, the factory set aside 20mm for the tiling thickness. If you measure 370mm, you do not have to worry too much at this time, because the diameter of the downpipe is generally 110mm, the outlet diameter of the toilet is 70mm, and the distance of 40mm can also be adjusted in the middle.

Summary: The detailed steps on the installation of the toilet and how much the appropriate size of the toilet wall from the wall are introduced to this, the toilet installation is not difficult, as long as you choose the appropriate size, so say that you must measure the size in advance before choosing Caixing.

Hotel Welcome Tray

Hotel Welcome Tray,Welcome Kettle Tray,Hotel Coffee Tray,Kettle With Tray

Uni-Sec (Ningbo) Electronics Technology Co., Ltd. , https://www.hospitalityunisec.com