Talking about sealant and its use

Talking about sealant and its use.


The tape was invented by the Americans in 1928 and is divided into three types: die-cut tape, double-sided tape, insulating tape, pressure-sensitive adhesive tape, high-temperature tape, and special tape. So far, people have found thousands of uses for tape, and tape is everywhere in our lives.

Waterproof sealant is generally used in industrial and domestic use: 1. Bonding sealing surface should be dense. Strong. Dry. Clean and must not have water, oil, dust, etc. 2. Cut the tip to meet the requirements, and use a sharp sharpener to pry the aluminum film inside the glue outlet. 3. Load the glue gun and squeeze the glue into the area where it needs to be sealed. 4. When the surface needs to be smoothed, it should be smoothed with soapy water and soapy water before the surface is dried.

Precautions: Avoid contact with the skin for a long time. If you accidentally splash into your eyes, please consult a doctor. Do not let children contact and use during storage. Pay attention to fire prevention. Sunscreen. Rainproof.

Precautions for the use of polysulfide sealant: 1. It cannot be blended with silicone sealant, otherwise it will affect its bonding performance. 2. The construction temperature is above 5 °C, otherwise it will affect its adhesion and curing speed. 3. Do a small sample test before construction.

The correct use of sealant can make it play its biggest role. Dongfang Rubber & Plastic Co., Ltd. is a professional manufacturer of adhesive tape factory, with independent intellectual property rights and many national patents. Merchants are welcome to come to order.



This article is reproduced from Langfang Bokai Sealing Material Factory: http://
Http://news.chinawj.com.cn Talking about sealant and its use Submission: 'Talk about sealant and its use

XB400 CAF Jointing Sheet

Description:XB400 CAF Jointing Sheet is made by good asbestos fiber with rubber ,compression molding it in thick paper fashion.

Usage:XB400 CAF Jointing Sheet is suitable for high temperature max 400℃ and high pressure max 5.0MPa,for water and saturated vapour,super vapour,gas inert gases transmitted in the joints of facilities and pipelines.

TEMP:400℃(max)

PRESS:5.0MPa(max)


Dimension:
4100×1500mm; 4500 x 1500mm;2000×1500mm;

1500×1500mm;1500×1000mm;1540x1360mm

1270×1300mm; 3810×1300mm 

Thickness:  0.5~6.0mm

Technical data:

Lateral Tensile Strength/MPa        â‰¥      15.0

Aging coefficient                   â‰¥       0.9

Loss on ignition/%                  â‰¤      28.0

Compression ratio/%                       7~17

Recovery/%                       â‰¥       45

Creep relaxation rate/%             â‰¤       50

Density(g/cm3)                           1.6~2.0

 

 Product photoes:

XB400 CAF Jointing Sheet

XB400 CAF Jointing Sheet

Xb400 Caf Jointing Sheet

Xb400 Caf Jointing Sheet,Jointing Sheet,steam jointing sheet,Gasket Joint Sheet

HEBEI HENGDA SEALING MATERIALS CO.,LTD. , http://www.hengdasealing.com