Many homes will choose to warm the floor, warm and comfortable, especially in line with ergonomic demand for temperature. When the cold winter arrives, the north has entered the heating mode. At this time, users often report that the geothermal water is not hot, and it is really very urgent. So, how to deal with the problem of not being warm and returning hot water ? We need to analyze the reasons why the floor is not warm, and then we must consider how to deal with it. Then look down.

How to deal with hot water without heating - pipe plugging

Reason: If most of the branch return water is similar to the main bar temperature, but the individual branch return water is not hot, then it means that the pipeline gas is blocked. This is because the floor heating is used for a long time, and the long-term non-cleaning is caused. Because the backwater pipeline will foul 1mm each year, and the small 1mm scale is very powerful, it can cause the water temperature to drop by 6°C. If it is attached to the inner wall of the pipeline for a long time, it will cause the geothermal pipeline to be blocked.

Solution: There are professional clean geothermal pipeline products on the market. It can remove impurities such as sediment and dirt, use the corrosion inhibitor to dissolve the warmth of the scale, and then remove the dirt quickly, which is a good solution to the geothermal return pipe caused by the pipe plugging. Not a hot issue.

2, how to deal with warm water backwater - loop uneven

If it is in a residential area, the heating effect of the neighbor's home floor heating is good, and only the heating effect of the home is not good, it may also lead to uneven circulation of the geothermal return pipe.

The solution of circuit unevenness: If the circuit is uneven due to the construction, we can use the small valve on the water separator to regulate the loop circulation. The “Ten” shape represents closed, and the “1” shape represents open. The circulation can generally be adjusted to achieve the desired heating effect.

3, how to deal with hot water is not hot - filter plugging

Reason: If the backwater branch and the main bar are not hot, it may be due to filter plugging.

Solution: This needs to remove the filter to clean it, and then re-install it. If the warming of the filter is not allowed to heat up, it may be caused by too much dirt in the floor heating pipe. Please professional cleaning company to clean.

4, how to deal with the warm water is not hot - other reasons

Some residential districts are centrally heated, and owners whose floors are too high or are at the end of the heating network may also lead to poorly-heated homes. They must report problems to the property or heating companies. If they are still not properly resolved, the owners can install them themselves. A circulation pump to increase hot water circulation.

The article concludes: The above analysis of common reasons and how to deal with hot water is not hot , I hope to be helpful to everyone. If you encounter similar problems in your life, you can solve it yourself and let the winter be no longer cold.

How to deal with warm water

Musk Xylene is an analogue of the explosive trinitrotoluene , so it is unsurprising that its safety characteristics have been studied in some detail. Indeed, the nitro musks were first discovered in an attempt to produce new high explosives. It has also been used – albeit in very small amounts – in mass-market consumer products for the last hundred years. 

Musk Xylene

Musk Xylene,Echa Musk Xylene,Ifra Musk Xylene,Musk Xylene Cas

Gan Su Original Flavor Co.,ltd , https://www.muskxylol.nl