1. Poor fluidity The melt index of the material is 30-70% lower than that of the common material, so the fluidity is poor, and it is prone to poor filling, poor welding, uneven distribution of glass fiber and the like. Especially for long fiber materials, the above defects are more likely to occur, and the fibers are easily damaged to affect the electromechanical properties.

2, the forming shrinkage is small, the anisotropy is obviously smaller than the ordinary material, but the anisotropy increases the shrinkage along the direction of the flow, the vertical direction is large, the near feed port is small, the distance is large, and the plastic parts are prone to warp. Qu, deformation.

3, poor mold release, large wear and tear, the material is not easy to demould, and the mold wear is large, the flow is on the casting system, the core and so on.

4, prone to gas formation, because the fiber surface treatment agent is easy to volatilize into a gas, must be discharged, otherwise it is prone to weld defects, lack of materials and burns.

MC NYLON is recognized as the most widely used and known engineering plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. It`s widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, better resistance to wear and heat deflection temperature. Temperature resistance from -40℃ to 110 ℃.

• Advantages:
  ♦ High strength and stiffness 
  ♦ High impact and notch impact strength 
  ♦ High heat deflection temperature
  ♦ Good at dampening 
  ♦ Good abrasion resistance
  ♦ Low coefficient of friction
  ♦ Good chemical stability against organic solvents and fuels
  ♦ Excellent electrical properties, ease of printing and dyeing
  ♦ Food safe, noise reduction

  Disadvantages:
  ♦ Poor dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water
  ♦ Poor acidproof ability, can`t dye with acid or touch overmuch acid
  ♦ Poor lightfastness, poor endurance in pollution

Mc Nylon Sheet

Mc Nylon Sheet, Blue Mc Nylon Sheet, Black Mc Nylon Sheet, Yellow Mc Nylon Sheet,Nylon Board

SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , https://www.xyhplastic.com