Why are bathroom mirrors afraid of moisture? Mirror glass is generally cut before use. The water vapor easily enters the mirror surface from the side cut by the glass cutter, corrodes the mirror surface, and produces mildew spots and rust spots. Therefore, after buying the mirror, apply a layer of paint on the side of the mirror and apply a layer on the back.

1. Do not touch the mirror with a wet hand, or wipe the mirror with a damp cloth to avoid increasing moisture penetration;

2. The mirror should not be exposed to salt, grease and acidic substances, which are likely to corrode the mirror surface;

3. The mirror should be wiped with a soft dry cloth or cotton to prevent the mirror surface from being rubbed;

4. Use a soft cloth or emery cloth and rub some kerosene or wax to wipe it;

5. Wipe the mirror and frame with a rag of milk to make it clear and bright;

6. Before bathing, apply soap to the mirror surface and wipe it with a dry cloth. A layer of soap film is formed on the mirror surface to prevent mirror surface blur;

7. Apply a proper amount of cleansing cloth to the mirror with a dry rag and spread evenly. The active ingredient contained in the detergent can effectively prevent the water vapor from condensing on the mirror surface, and can play a good anti-fog effect;

8. Astringent lotions or detergents can also be used;

9. Wipe with oil-absorbing paper, the effect is good.

Precautions

In terms of materials, the mirror is divided into two types: aluminum mirror and silver mirror. When choosing a mirror, we should choose a silver mirror as much as possible. The mercury density is high, and it is easy to fit closely with the glass. It is not easy to get into the water and damp. It can be used for a long time. The waterproof mirrors currently on the market are mostly silver mirrors.

Mirror anti-fog has a coup

Scrub the mirror with soap

Wipe the mirror with soapy water

After washing the hot bath, I want to comb the hair in the bathroom mirror, but the mirror is covered with water vapor, which can't be clearly seen. So how do you make an ordinary mirror have a certain anti-fog function?

We can apply detergent to the mirror surface, but don't use too much. If the amount used is too much or unevenly applied, the mirror will be blurred and smoothed with a clean cloth. . Detergent contains a surfactant, which can effectively prevent water vapor from condensing on the mirror surface and acts as an anti-fog.

Brush it with soapy water or detergent.

Dishwashing detergent or soapy water can be applied to the mirror surface. Because both detergent and soapy water contain surfactants, it can effectively prevent water vapor from condensing on the mirror surface and function as anti-fog.

For glasses, you can do this! Wash the mirror and use soap to remove a thin layer on it. Try it! You can see the effect when you have heat.

When decorating, add a heater at the back of the mirror or let the hot water pipe flow through the back of the mirror. As long as the temperature of the mirror itself is high, there will be no fog.

Soapy water

Pouring hot water on the mirror, the temperature rise of the mirror naturally prevents the water vapor in the air from condensing into water droplets, and there is naturally no fog on the mirror. There is an anti-fog mirror specifically used in the bathroom, the principle is to do heat treatment.

Granular Carbon

Granular Carbon,Pelletized Activated Carbon,Coal Based Granular Activated Carbon,Water Treatment Granular Activated Carbon

NINGXIA TIANFU ACTIVATED CARBON CO.,LTD , https://www.tjfyhxt.com