For 15 years, we have been focusing on the research and development of plastic pulverizers (also called crushers) with strong pulverizer series, which has won the favor of injection molding enterprises in the Pearl River Delta. First Grade Silicon Carbide,Silicon Carbide For Abrasive,Silicon Carbide For Refractories,Metallurgical Grade Black Silicon Carbide ningxia hexing carbon based materials co.ltd , https://www.hexingsicmanufacture.com
For 15 years, we have been focusing on the research and development of plastic pulverizers (also called crushers) with strong pulverizer series, which has won the favor of injection molding enterprises in the Pearl River Delta. Recently, I received a phone call from the technical person in charge of some new companies and consulted the knowledge of the use and maintenance of the crusher. Below, we will give a detailed introduction to the technical experts of the company. I hope to help you as soon as possible, if other problems have not been resolved? We will send experts to guide you, so that you can feel deeply, in fact, [filter] has always been around you.
The use and maintenance of plastic shredders vary according to the type and working conditions of the plastic shredder. Plastic pulverizers are generally used, with special attention to the following 8 points.
1. The manpower that should be carried out before starting is to turn the drive wheel two turns to confirm whether it is flexible. After confirming the flexibility, start to open the plastic grinder, but wait for the plastic grinder to operate normally before feeding.
2. Before the plastic pulverizer stops running, the feeding should be stopped first, and the materials in the machine should be discharged, and then the power should be cut off.
3, in the operation, pay attention to the temperature of the bearing, the bearing must maintain a good lubrication state, and pay attention to the presence of abnormal sound and vibration. If it is found to be abnormal, stop it first to check if it is caught by an object that is not easily crushed, or if the plastic shredder is damaged.
4. Keep the plastic shredder evenly fed to prevent overload. Prevent metal and wood that are not easily crushed from falling into the machine. When it is impossible to smash, the water supply should not be too high; when wet smashing, you need to maintain a proper amount of water to prevent clogging and reduce production capacity.
5, check whether the crushed product particle size meets the requirements, if it exceeds the particle size required for plastic products, should find out the reasons (such as excessive screen gap, too wide discharge port, hammer wear, etc.), and take appropriate measures to eliminate.
6, when the plastic shredder stops, check the tightness of the fastening bolts, how the wear parts wear. For the tooth pulverizer, the parking machine should be used to eliminate the wood caught between the teeth.
7, worn parts should be replaced or repaired.
8, the safety device of the plastic shredder, to maintain a good state, absolutely can not be careless, so that the safety device fails.
If you want to know more about the article please enter; http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
The use and maintenance of plastic shredders are everyone watching