China's launch of high-temperature Class II emergency response protection against heat and heat

News Related Keywords: No tags.

On July 30, the China Meteorological Administration initiated a major meteorological disaster (high temperature) Class II emergency response. This is also the highest level of high-temperature emergency response initiated by the meteorological department. It is estimated that from July 30 to August 8th, there will be a wide range of high-temperature weather with daily maximum temperature exceeding 35°C in Jianghuai, Jiangnan, and Chongqing, among which the continuous high temperature days in the south of the Jiangnan region will last 5 to 8 days, and some cities may break through high temperatures. Historical extremes.
According to the meteorological disaster emergency plan of the China Meteorological Administration, when the Central Meteorological Observatory issued a high-temperature orange warning for two days in a row, it is expected that most of the warning areas in the next three days will continue to meet the above-mentioned standards for high-temperature yellow warning and can initiate emergency response. Level emergency response is also the highest level of high temperature emergency response.
The high temperature warning signal is divided into three levels, which are represented by yellow, orange and red respectively.
(I) High-temperature yellow warning signal, standard: The maximum daily temperature for three consecutive days will be above 35°C.
(B) High-temperature orange warning signal, standard: The maximum temperature in 24 hours will rise above 37°C.
(c) High-temperature red warning signals, standard: The maximum temperature in 24 hours will rise above 40°C.
How to make a protective response:
1. Pay attention to cooling of the sun and minimize outdoor activities during the day;
2. The relevant departments should pay special attention to fire prevention;
3. It is recommended to stop outdoor open-air operations.
The weather is very hot and it is easy to suffer from heat stroke. The protection measures for people suffering from heat stroke and other diseases (especially for the elderly and the sick and children) are good; the education department should arrange schools without heat-stroke cooling equipment to suspend classes; and suspend or cancel students’ students under strong sunlight. Outdoor activities; in the high temperature period, the labor administrative department may issue a suspension notice according to the situation;

High Resistance Alloy is used to produce resistance elementof conductive material.Requirements including High mechanical strength, good corrosion resistance and oxidation resistance. Working temperature is usually at500 ℃. Commonly used with constantan chromium iron, iron chromium aluminum, nickel chromium, nickel, resistivity rho (20 ℃) is 1 Ω was/m or so. It is not used in the conduction of current, but with its high resistance to limit or control the current in the circuit, such as motor, potentiometer, standard resistors, potentiometers, slip line resistor resistance element and resistance  line, etc.; For the using of high resistance in the pressure sensor,Temperature compensator and temperature measuring resistor of resistance element to creatte reflect strain, temperature, magnetic field and parameters; High resistance alloy can also be used as heating elements in the manufacture of  the resistance heating equipment, could be applied in current, voltage regulating and the winding of control components.Resistance Alloy

Resistance Electrothermal Alloy

Resistance Alloy,Corrosion Resistant Alloy,Resistance Electrothermal Alloy,Fecral Resistance Heating Alloys

Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com