Counter Flange with Accessories
Our factory specialzied in counterflange and accessories design and development, production and sales. The flange we produced can follow GB, ANSI, DIN, JIS, BS series and non-standard flange with material of stainless steel, carbon steel, such as A105, 20#, 304, 304L, 316,316L, 2520, 321TL and a variety of special steel which widely used in construction and maintenance of petroleum, chemical engineering, metallurgy, shipbuilding, gas, urban construction, plumbing, military, fire and environmental protection industry.
Counter Flange With Accessories,Neck Type Counter Flange,Flat Type Counter Flange,Counter Flanges With Accessories Yongjia South Trading Co.,Ltd , https://www.n-lvalve.comCommon Terms and Definitions of Bearings (16)
17. Flanged Housing – A housing that features a radial flange and a seat on the outer surface of the bearing. It is aligned with the bearing shaft and includes screw holes for securing the device.
18. Adapter Sleeve – A sleeve with an axially open cylindrical bore. Its outer surface is conical, with external threads at the smaller end. It is used for bearing devices with tapered bores, such as those with a lock nut and lock washer, and is mounted on a shaft with a cylindrical outer surface.
19. Socket Withdrawal Sleeve – A sleeve with an axial opening and a cylindrical bore. Both its inner and outer surfaces are conical, and it has external threads at the larger end. It is used for mounting or removing bearings with tapered bores from a shaft with a cylindrical outer surface, typically using a nut.
20. Lock Nut – A nut with a cylindrical outer surface and an axial groove. It is secured by a lock washer and an annular wrench to provide axial positioning for rolling bearings.
21. Lock Washer – A thin steel plate washer with multiple outer claws. One claw locks the nut in place, while another is inserted into the axial sleeve of the adapter sleeve or shaft.
22. Eccentric Locking Collar – A grooved steel ring with a protrusion in the inner hole at one end. It is used on the flat end of an outer spherical bearing with a flat and extended part. The inner ring can be rotated relative to the outer ring to tighten the inner ring, and a top wire is fastened to the shaft.
23. Concentric Locking Collar – A steel ring mounted on the wide inner ring of an outer spherical bearing. A top wire is screwed into a hole in the inner ring and touches the shaft to ensure proper alignment.
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Bearing Related Knowledge
Explore more about bearing life, seal design, bearing cleanliness, bearing wear, one-way bearings, motor bearings, and other technical aspects.
This article is linked to http://
Please credit China Bearing Network: http://
Previous: Discussion on "Technical Specifications for Correcting Bearings"
Next: Description of Stainless Steel Deep Groove Ball Bearings
If you found this information helpful, feel free to share it with friends or leave a comment. You can also close the window if needed.
Common terms and definitions of bearings (16)
Source: Bearing Network | Date: June 5, 2013