When installing the transmission parts on the output shaft of the worm gear reducer, attention must be paid to the soft operation. It is forbidden to use rough tools such as hammers. It is best to use the internal thread of the assembly tool and the end shaft for installation. The parts are pressed into the worm gear reducer, so that the internal parts of the worm gear reducer can be protected from damage. Screw Lock Inserts,High Quality Screw Lock Inserts,Screw Lock Inserts Details, CN Xinxiang Donghai Industry Co., Ltd. , https://www.nbtmzz.com
When installing the transmission parts on the output shaft of the worm gear reducer, attention must be paid to the soft operation. It is forbidden to use rough tools such as hammers. It is best to use the internal thread of the assembly tool and the end shaft for installation. The parts are pressed into the worm gear reducer, so that the internal parts of the worm gear reducer can be protected from damage. 
The fixing of the worm gear reducer is very important. To ensure smooth and firm, we should generally install the worm gear reducer on a horizontal foundation or base. At the same time, the oil in the oil drain should be removed and the cooling air circulation should be smooth. When the worm gear reducer is not well fixed and the foundation is unreliable, it will cause vibration, etc., and the bearings and gears will be damaged.
Http://news.chinawj.com.CN Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
The fixing of the worm gear reducer is very important