Zinc Door Handle On Zinc Rosette Zinc Door Handle On Zinc Rosette,Zinc Door Handle,Zinc Rosette Door Handle,Zinc Alloy Door Handle Wenzhou Shenghong Metal Products Co.,Ltd , https://www.shenghonglock.com
1. Ensure the cutting machine operates quietly and smoothly as usual. Follow the standard procedure when starting the laser, adjusting brightness, and testing the machine. Always adhere to the proper startup sequence to maintain safety and efficiency.
2. Operators must be properly trained and fully familiar with the cutting software, equipment layout, and system functions. A solid understanding of the operating system is essential for safe and effective use.
3. Always wear the required protective gear, including certified safety glasses designed to protect against laser exposure. Compliance with personal protection regulations is mandatory.
4. Avoid processing materials that cannot be safely irradiated or cut by the laser. This helps prevent hidden damage caused by smoke and vapor emissions during the process.
5. Never leave the control booth unattended while the equipment is running. If you need to stop the machine, make sure to turn off the power supply or Lock it out to prevent accidental operation.
6. Store tools and equipment in a secure location. When not in use, turn off the laser or close the shutter. Keep flammable materials like paper or cloth away from exposed laser beams to avoid fire hazards.
7. If an issue arises during operation, immediately shut down the machine and notify the supervisor. Clear any obstructions promptly to prevent further complications.
8. Maintain a clean and organized workspace. Ensure the laser, table, and surrounding area are free of oil and debris. Stack workpieces, plates, and waste materials according to the designated plan.
9. When handling gas cylinders, take precautions to prevent damage to the welding wire. Avoid crushing or damaging the cylinder. Always follow inspection procedures for both use and transportation. Never expose gas cylinders to direct sunlight or heat sources. When opening the valve, stand to the side of the cylinder mouth.
10. Follow the high-pressure maintenance protocol. Perform daily checks, weekly maintenance, and every 1,000 hours of operation or every six months, as specified in the maintenance schedule.
11. After starting the machine, manually move the X, Y, and Z axes at a low speed to check for any unusual noises or movement issues. This ensures the machine is functioning correctly before full operation.
12. Before beginning a new workpiece, perform a trial run to confirm the working environment is suitable and safe.
13. Always inspect the machine’s operating environment carefully to prevent the cutting head from exceeding its travel range or causing collisions between components.
14. During active operations, ensure the equipment is set up in a way that prevents unauthorized access. Never enter the safety fence while the machine is running. All actions must be precise and controlled. Entering the active zone at any time can result in serious injury or equipment damage.
15. When feeding materials into the machine, always monitor the feeding process closely. Failure to do so may cause the material to arch or collide with the cutting head, resulting in significant damage.
16. Before starting production, verify that all preparations are complete. Check that the shielding gas is activated, air pressure is sufficient, and the laser is on standby. Confirm that the feeding mechanism and focus are properly engaged and operational.
Safety rules for laser cutting machines