Sanitary ware is used more frequently, and it is easy to age due to improper maintenance. Today, Faenza edits some small knowledge of sanitary ware maintenance to help you to do the sanitary ware maintenance work.

1. In order to ensure the accurate construction and installation of the toilet, please try to seal it with glass glue first. If cement mortar is used, the mortar ratio should be no more than 3:1 to prevent the toilet from being broken due to excessive stress.

2, do not rush into the sanitary ware into news paper, paper pad, sanitary napkins and other easily blocked items.

3. The debris that accidentally falls into the toilet bowl should be taken out in time. When it is blocked, it will be removed with the skin suction gas.

4. Do not allow hard tools or rough fabrics to come into contact with ceramic products. Do not knock or hit.

5. Scrub the attached dirt with the cleaning agent on schedule. When the cleaning is not possible, remove it with a brush to keep the surface clean.

6, can not be used and stored in the environment below zero degrees Celsius water.

7, computer bath room: The most important thing is to prevent its leakage, check the circuit to check whether it is insulated.

8. Do not place extra things inside the bathtub. (towels, silk, etc.).

9. In order to avoid injury to the bathtub and piping, do not use bath salts or organic solvents containing sulfur, acid and alkali.

Ferrites are usually non-conductive ferrimagnetic ceramic compounds derived from iron oxides such as hematite (Fe2O3) or magnFerrites are usually non-conductive ferrimagnetic ceramic compounds derived from iron oxides such as hematite (Fe2O3) or magnetite (Fe3O4) as well as oxides of other metals.

Manufacturing process:

1). Dry process:By dry process, can produce isotropic & anisotropic magnets. The tool can be changed and developed easily.

2). Wet process:By wet process, only anisotropic magnets can be produced. It is complicated to change the tool and the tooling charge is much higher.

Magnetization:

1). Isotropic ferrite magnets are not oriented and can be magnetized in any direction.

2). Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.

Ferrite Magnet

Ferrite Magnet,Sintered Ferrite Magnet,Ferrite Round Magnet,Hard Ferrite Magnet

Chongqing Great Well Magnet Co.,ltd. , https://www.gwmagnet.com