Solid wood floor maintenance strategy

As an important home decoration material, solid wood flooring is increasingly laid in people's living rooms and study rooms. It is favored by more and more people with its excellent quality and excellent decorative effect, but how is it better? It is a nuisance to take care of it.

First, anti-fouling

Floor wax can be applied to the floor every two or three months. Before waxing, the dust should be removed first, then waxed with a clean lint-free soft rag, starting from the edge of the wooden floor, and then rubbing on the surface of the board. After evenly wiping it again, use the original rag (no more wax) from the edge of the original wipe, and wipe it one by one according to the above scheme. The waxed floor surface not only cleans the zebra, but also refreshes it, and it also protects the paint film and delays aging.

When maintaining solid wood flooring, be sure to keep the floor dry and clean. Do not use water or wet with alkaline water or soapy water to avoid damaging the brightness of the paint. If it is dirty or dirty, wipe it with a dry cloth. It is also necessary to have a wax once a month, but wipe the water vapor and stains before waxing.

Second, painting

After three or five years of use, the floor can be repainted with the same paint on the original painted floor. In addition to dust removal and descaling before painting, apply a finer water sandpaper, damp warm water, gently polish the surface of the board, grind off the residual oil on it, and grind the small paint particles left in the last paint. After polishing, wipe it with a clean rag and apply paint. This painted floor will be smoother, cleaner and more radiant.

Third, heat protection

If you encounter heating leaks and water on the wooden floor, you must wipe it clean in time. Do not expose the sun directly or bake it in an electric oven to avoid excessive drying and cracking of the floor. Solid wood flooring should not be used for a long time. Do not cover it with plastic cloth or newspaper. Because of the long time, the paint film will become sticky and lose its luster. At the same time, do not put hot water pots, hot rice pots and other things directly on the floor surface, so as not to burn the paint film.

Fourth, scrub

In daily cleaning, use a vacuum cleaner to clean it, then clean it with a soft cloth dampened with a special detergent or soap. For large area cleaning, it can be done with a sprayer or a rotary cleaner. For natural lacquered solid wood flooring, water is not good for it. Minimize excess moisture when cleaning. Wring the rag when scrubbing. The oil wax solid wood floor should be removed from the black rubber and other stains that cannot be removed with water can be removed with a soft cloth, low concentration alcohol or a little white wine.

No-Carrier Black Masterbatch is one special black mastebatch. The biggest speciality of this Black Masterbatch is no any polymer carrier, the main formulas are the carbon black and some chemical additives. This black masterbatch has very very low MFI, bad dispersion. So, it can not be directly used for blowing, injection, molding. But this black masterbatch has high pigmentation, only be used for  compounding. It would not damage the engineer material's performance.

No-Carrier Black Masterbatch

No Carrier Black Masterbatch,No Carrier Carbon Black Masterbatch,Compound Black Masterbatch,No Polymer Black Masterbatch

Anda Masterbatch( Group) Co., Limited ,